Basit öğe kaydını göster

dc.contributor.authorAkan, Aydin
dc.contributor.authorArslan, Yunus Ziya
dc.contributor.authorBaslo, Mehmet Barış
dc.contributor.authorAdli, Mehmet Arif
dc.date.accessioned2021-03-04T12:42:47Z
dc.date.available2021-03-04T12:42:47Z
dc.date.issued2010
dc.identifier.citationArslan Y. Z. , Adli M. A. , Akan A., Baslo M. B. , "Prediction of externally applied forces to human hands using frequency content of surface EMG signals", COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE, cilt.98, sa.1, ss.36-44, 2010
dc.identifier.issn0169-2607
dc.identifier.othervv_1032021
dc.identifier.otherav_78aa1235-c8fc-48c4-832e-5f1e33d06362
dc.identifier.urihttp://hdl.handle.net/20.500.12627/82750
dc.identifier.urihttps://doi.org/10.1016/j.cmpb.2009.08.005
dc.description.abstractIn this work, a new signal processing method was proposed in order to predict externally applied forces to human hands by deriving a relationship between the surface electromyographic (SEMG) signals and experimentally known forces. This relationship was investigated by analyzing the spectral features of the SEMG signals. SEMG signals were recorded from three subjects during isometric contraction and from another three subjects during anisometric contraction. In order to determine force-SEMG signal relationship, higher order frequency moments (HOFMs) of the signals were calculated and used as characterizing features of SEMG signals. Subsequently, artificial neural networks (ANN) with backpropagation algorithm were trained by using the HOFMs. Root mean square difference (RMSD) between the actual and predicted forces was calculated to evaluate force prediction performance of the ANN. In addition to RMSD, cross-correlation coefficients between actual and predicted force time histories were also calculated for anisometric experiment results. The RMSD values ranged from 0.34 and 0.02 in the isometric contraction experiments. In the anisometric contraction tests, RMSD results were between 0.23 and 0.09 and cross-correlation coefficients ranged from 0.91 to 0.98. In order to compare the performance of the HOFMs with a widely used EMG signal processing technique, root-mean-squared (RMS) values of the EMG signals were also calculated and used to train the ANN as another characterizing feature of the signal. Predicted forces using HOFMs technique were in general closer to the actual forces than those of obtained by using RMS values. The results indicated that the proposed signal processing method showed an encouraging performance for predicting the forces applied to the human hands, and the spectral features of the EMG signal might be used as input parameter for the myoelectric controlled prostheses. (C) 2009 Elsevier Ireland Ltd. All rights reserved.
dc.language.isoeng
dc.subjectKlinik Tıp (MED)
dc.subjectTıp
dc.subjectSağlık Bilimleri
dc.subjectTemel Tıp Bilimleri
dc.subjectBiyoistatistik ve Tıp Bilişimi
dc.subjectBilgisayar Bilimleri
dc.subjectBilgisayar Grafiği
dc.subjectBiyoenformatik
dc.subjectBiyomedikal Mühendisliği
dc.subjectMühendislik ve Teknoloji
dc.subjectTIBBİ BİLİŞİM
dc.subjectKlinik Tıp
dc.subjectMühendislik
dc.subjectMÜHENDİSLİK, BİYOMEDİKSEL
dc.subjectBİLGİSAYAR BİLİMİ, TEORİ VE YÖNTEM
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectBilgisayar Bilimi
dc.subjectBİLGİSAYAR BİLİMİ, İNTERDİSİPLİNER UYGULAMALAR
dc.titlePrediction of externally applied forces to human hands using frequency content of surface EMG signals
dc.typeMakale
dc.relation.journalCOMPUTER METHODS AND PROGRAMS IN BIOMEDICINE
dc.contributor.departmentMarmara Üniversitesi , ,
dc.identifier.volume98
dc.identifier.issue1
dc.identifier.startpage36
dc.identifier.endpage44
dc.contributor.firstauthorID56095


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster