| dc.contributor.author | Ipek, Metin | |
| dc.contributor.author | UYSAL, Mücteba | |
| dc.contributor.author | Yilmaz, Kemalattin | |
| dc.date.accessioned | 2021-03-04T11:59:44Z | |
| dc.date.available | 2021-03-04T11:59:44Z | |
| dc.date.issued | 2012 | |
| dc.identifier.citation | Ipek M., Yilmaz K., UYSAL M., "The effect of pre-setting pressure applied flexural strength and fracture toughness of reactive powder concrete during the setting phase", CONSTRUCTION AND BUILDING MATERIALS, cilt.26, sa.1, ss.459-465, 2012 | |
| dc.identifier.issn | 0950-0618 | |
| dc.identifier.other | av_75288124-c25d-40a0-b538-abb53b7de9d0 | |
| dc.identifier.other | vv_1032021 | |
| dc.identifier.uri | http://hdl.handle.net/20.500.12627/80488 | |
| dc.identifier.uri | https://doi.org/10.1016/j.conbuildmat.2011.06.045 | |
| dc.description.abstract | In this study, the effect of pre-setting pressure on reactive powder concrete (RPC) was examined. The fresh (plastic) concrete samples were filled in a specified beam mould and six different pre-setting pressure values (control-without pressure, 5, 10, 15, 20, 25 MPa) were applied. Flexural strength was improved by 34% with very low amounts (5 MPa) of pre-setting pressure. Also, toughness was increased more than thrice. In this study, the maximum flexural strength of 36.4 MPa and toughness of 116.960 N m were obtained under 25 MPa pre-setting pressure. Volume of sample was decreased 7.9% by pre-setting pressure. (C) 2011 Elsevier Ltd. All rights reserved. | |
| dc.language.iso | eng | |
| dc.subject | Mühendislik | |
| dc.subject | Mühendislik ve Teknoloji | |
| dc.subject | İNŞAAT VE YAPI TEKNOLOJİSİ | |
| dc.subject | Yapı | |
| dc.subject | Mühendislik, Bilişim ve Teknoloji (ENG) | |
| dc.subject | MÜHENDİSLİK, SİVİL | |
| dc.subject | MALZEME BİLİMİ, MULTIDISCIPLINARY | |
| dc.subject | Malzeme Bilimi | |
| dc.subject | İnşaat Mühendisliği | |
| dc.title | The effect of pre-setting pressure applied flexural strength and fracture toughness of reactive powder concrete during the setting phase | |
| dc.type | Makale | |
| dc.relation.journal | CONSTRUCTION AND BUILDING MATERIALS | |
| dc.contributor.department | Sakarya Üniversitesi , , | |
| dc.identifier.volume | 26 | |
| dc.identifier.issue | 1 | |
| dc.identifier.startpage | 459 | |
| dc.identifier.endpage | 465 | |
| dc.contributor.firstauthorID | 433117 | |
