Basit öğe kaydını göster

Production and Precipitation Hardening of Mg-Ca-Zn-Co Alloy for Tissue Engineering

dc.contributor.authorMutlu, Ilven
dc.date.accessioned2021-03-04T10:06:09Z
dc.date.available2021-03-04T10:06:09Z
dc.date.issued2017
dc.identifier.citationMutlu I., "Production and Precipitation Hardening of Mg-Ca-Zn-Co Alloy for Tissue Engineering", MAGNESIUM RESEARCH, cilt.30, sa.1, ss.16-27, 2017
dc.identifier.issn0953-1424
dc.identifier.otherav_6b81fc7c-1b49-4073-8377-5eb5ffdd80ec
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/74337
dc.identifier.urihttps://doi.org/10.1684/mrh.2017.0417
dc.description.abstractIn this study, Mg-Ca-Zn-Co alloy specimens for biomedical applications were produced by the powder metallurgy method. The Mg-Ca-Zn-Co alloy could be used as a scaffold material in tissue engineering applications. Electrochemical corrosion behavior of the specimens was investigated in simulated body fluid environment. Electrochemical corrosion resistance of the specimens was increased with increasing Zn and Ca contents of the alloy up to an optimum composition and then decreased. Optimum values for Ca and Zn additions were about 0.7 wt.% and 3.0 wt.% respectively. Young's modulus values of the specimens were determined by nondestructive ultrasonic measurement. Alloying element addition increased the Young's modulus of the specimens. Precipitation hardening of the Mg-Ca-Zn-Co alloy increased the Young's modulus and the corrosion rate of the specimens.
dc.language.isoeng
dc.subjectDahili Tıp Bilimleri
dc.subjectİç Hastalıkları
dc.subjectEndokrinoloji ve Metabolizma Hastalıkları
dc.subjectYaşam Bilimleri
dc.subjectMoleküler Biyoloji ve Genetik
dc.subjectSitogenetik
dc.subjectTemel Bilimler
dc.subjectTıp
dc.subjectSağlık Bilimleri
dc.subjectKlinik Tıp (MED)
dc.subjectKlinik Tıp
dc.subjectENDOKRİNOLOJİ VE METABOLİZMA
dc.subjectYaşam Bilimleri (LIFE)
dc.subjectMoleküler Biyoloji ve Genetik
dc.subjectBİYOKİMYA VE MOLEKÜLER BİYOLOJİ
dc.titleProduction and Precipitation Hardening of Mg-Ca-Zn-Co Alloy for Tissue Engineering
dc.typeMakale
dc.relation.journalMAGNESIUM RESEARCH
dc.contributor.departmentİstanbul Üniversitesi , Mühendislik Fakültesi , Metalurji Ve Malzeme Mühendisliği
dc.identifier.volume30
dc.identifier.issue1
dc.identifier.startpage16
dc.identifier.endpage27
dc.contributor.firstauthorID238156


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster