Show simple item record

dc.contributor.authorCaborn, David N. M.
dc.contributor.authorNyland, John
dc.contributor.authorDoral, Mahmut Nedim
dc.contributor.authorDemirhan, Mehmet
dc.contributor.authorSarban, Sezgin
dc.contributor.authorKocabey, Yavuz
dc.contributor.authorTaser, Omer
dc.date.accessioned2021-03-03T19:56:01Z
dc.date.available2021-03-03T19:56:01Z
dc.date.issued2006
dc.identifier.citationKocabey Y., Taser O., Nyland J., Doral M. N. , Demirhan M., Caborn D. N. M. , Sarban S., "Pullout strength of meniscal repair after cyclic loading: comparison of vertical, horizontal, and oblique suture techniques", KNEE SURGERY SPORTS TRAUMATOLOGY ARTHROSCOPY, cilt.14, sa.10, ss.998-1003, 2006
dc.identifier.issn0942-2056
dc.identifier.otherav_5728565f-ac47-4959-9ff8-b962cfd34586
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/61496
dc.identifier.urihttps://doi.org/10.1007/s00167-006-0079-9
dc.description.abstractThis in vitro biomechanical study with cyclic loading compared the pullout strength of vertical, horizontal, and oblique sutures used for meniscal lesion repair. Following repair of vertical longitudinal lesions created in bovine medial menisci, three groups of seven specimens (vertical, horizontal, and oblique sutures) underwent cyclic loading in a randomized test order (5 mm/min, cycling between 5 and 50 N at 1 Hz for 100 cycles) prior to load to failure testing (5 mm/min). Displacement did not differ between groups during cyclic or load to failure testing. Construct stiffness during cyclic testing was superior for the oblique suture (6.9 +/- 1.5 N/mm, P = 0.007) and the vertical suture (6.4 +/- 7 N/mm, P = 0.03) groups compared to the horizontal suture group (4.4 +/- 0.52 N/mm). The oblique suture (171.9 +/- 25.9 N, P < 0.0001) and the vertical suture (145.9 +/- 32.3 N, P = 0.001) groups displayed superior load at failure compared to the horizontal suture group (88.8 +/- 8.2 N). Construct stiffness during load to failure testing did not differ between groups. Suture rupture was the failure mode for all specimens of the oblique suture group. Suture rupture was the failure mode for 57% (4/7) of the vertical suture group with the remaining specimens (3/7, 43%) failing from intact suture pullout through meniscal tissue. All horizontal suture group specimens failed by intact suture pulling through meniscal tissue. With comparable stiffness during cyclic testing, comparable load at failure as vertical sutures, and less evidence of intact suture pullout through the meniscus, an oblique suture technique may combine the beneficial characteristics of vertical (superior biomechanical strength) and horizontal (ease of application, longer sutures with a tendency to cover a larger meniscal tissue area) suture-repair techniques.
dc.language.isoeng
dc.subjectSağlık Bilimleri
dc.subjectCerrahi Tıp Bilimleri
dc.subjectOrtopedi ve Travmatoloji
dc.subjectSosyal ve Beşeri Bilimler
dc.subjectSosyoloji
dc.subjectORTOPEDİ
dc.subjectKlinik Tıp
dc.subjectKlinik Tıp (MED)
dc.subjectSPOR BİLİMLERİ
dc.subjectSosyal Bilimler Genel
dc.subjectSosyal Bilimler (SOC)
dc.subjectCERRAHİ
dc.subjectTıp
dc.titlePullout strength of meniscal repair after cyclic loading: comparison of vertical, horizontal, and oblique suture techniques
dc.typeMakale
dc.relation.journalKNEE SURGERY SPORTS TRAUMATOLOGY ARTHROSCOPY
dc.contributor.department, ,
dc.identifier.volume14
dc.identifier.issue10
dc.identifier.startpage998
dc.identifier.endpage1003
dc.contributor.firstauthorID180170


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record