Basit öğe kaydını göster

dc.contributor.authorADIGÜZEL, DENİZ
dc.contributor.authorTÜYLÜ, SERKAN
dc.contributor.authorEker, Hasan
dc.contributor.authorBaşçetin, Ataç
dc.date.accessioned2022-07-04T12:55:03Z
dc.date.available2022-07-04T12:55:03Z
dc.identifier.citationBaşçetin A., ADIGÜZEL D., Eker H., TÜYLÜ S., "The investigation of geochemical and geomechanical properties in surface paste disposal by pilot-scale tests", INTERNATIONAL JOURNAL OF MINING RECLAMATION AND ENVIRONMENT, 2022
dc.identifier.issn1748-0930
dc.identifier.othervv_1032021
dc.identifier.otherav_32186f2c-eda8-4bca-ad52-1e1018f9af43
dc.identifier.urihttp://hdl.handle.net/20.500.12627/182202
dc.identifier.urihttps://doi.org/10.1080/17480930.2022.2076501
dc.description.abstractToday, seepage control in tailings dams has become an important problem due to the increased production in mining sites. Although very techniques have been developed to solve this problem, research in this field continues. The reason for this is that there is an ongoing search for a one hundred percent successful method to prevent seepage. In this study, the geochemical and geomechanical properties of paste material stored by the surface paste disposal (SPD) method were investigated by pilot field tests. To determine the effects of cement and pozzolanic materials on the geochemical and geomechanical properties of the paste, 2 different pilot-scale storage designs were observed for about 1 year, with no additives (reference) and binder added to some layers (cement and fly ash). Based on the data derived from the former laboratory investigations and with no additives and with a few layers of cement and fly ash, the two different designs were applied on a pilot scale near the existing tailings dam of a currently active mining enterprise. These designs were observed in inland conditions for about 1 year to determine the effects of seasonal changes on the material. The seepage analysis, surface crack densities, microstructural properties, consolidation, and cohesion values of these designs, which are directly exposed to atmospheric effects, were determined during the study period. According to the results obtained, the use of cement improved the volume compressibility coefficient of the material by approximately 25% compared to the reference design. However, the use of fly ash alongside cement improved the volume compressibility coefficient by about 75%. In conclusion, the use of cement made the material more resistant to external factors, and the usability of fly ash, which was used at a 50% replacement ratio with cement to bring down the cost, for long-time storage in the industry was demonstrated within the scope of the study.
dc.language.isoeng
dc.subjectÇevre Mühendisliği
dc.subjectMaden Mühendisliği ve Teknolojisi
dc.subjectMühendislik ve Teknoloji
dc.subjectAquatic Science
dc.subjectGeneral Engineering
dc.subjectNature and Landscape Conservation
dc.subjectEngineering (miscellaneous)
dc.subjectEnvironmental Science (miscellaneous)
dc.subjectPhysical Sciences
dc.subjectLife Sciences
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMADEN VE MİNERAL İŞLEM
dc.subjectTarım ve Çevre Bilimleri (AGE)
dc.subjectÇevre / Ekoloji
dc.subjectÇEVRE BİLİMLERİ
dc.subjectTarımsal Bilimler
dc.subjectMühendislik
dc.titleThe investigation of geochemical and geomechanical properties in surface paste disposal by pilot-scale tests
dc.typeMakale
dc.relation.journalINTERNATIONAL JOURNAL OF MINING RECLAMATION AND ENVIRONMENT
dc.contributor.departmentİstanbul Teknik Üniversitesi , Maden , Maden Mühendisliği
dc.contributor.firstauthorID3425367


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster