Basit öğe kaydını göster

ANALYTICAL SYNCHRONIZATION OF TWO-END MEASUREMENTS FOR TRANSMISSION LINE PARAMETERS ESTIMATION AND FAULT LOCATION

dc.contributor.authorDawidowski, Pawel
dc.contributor.authorNAYIR, Ahmet Nevzat
dc.contributor.authorIzykowski, Jan
dc.date.accessioned2022-02-18T11:19:28Z
dc.date.available2022-02-18T11:19:28Z
dc.date.issued2013
dc.identifier.citationDawidowski P., Izykowski J., NAYIR A. N. , "ANALYTICAL SYNCHRONIZATION OF TWO-END MEASUREMENTS FOR TRANSMISSION LINE PARAMETERS ESTIMATION AND FAULT LOCATION", ISTANBUL UNIVERSITY-JOURNAL OF ELECTRICAL AND ELECTRONICS ENGINEERING, cilt.13, sa.1, ss.1569-1574, 2013
dc.identifier.othervv_1032021
dc.identifier.otherav_ea6a763e-6a23-4cb6-af37-b6296d6e0a60
dc.identifier.urihttp://hdl.handle.net/20.500.12627/180933
dc.description.abstractThis paper presents a new setting-free approach to synchronization of two-end current and voltage unsynchronized measurements. Authors propose new non-iterative algorithm processing three-phase currents and voltages measured under normal steady state load condition of overhead line. Using such synchronization the line parameters can be estimated and then precise fault location can be performed. The presented algorithm has been tested with ATP-EMTP software by generating great number of simulations with various sets of line parameters proving its usefulness for overhead lines up to 200km length.
dc.language.isoeng
dc.subjectBiyolojik Oşinografi (Deniz Biyolojisi
dc.subjectBilgi Sistemleri, Haberleşme ve Kontrol Mühendisliği
dc.subjectSinyal İşleme
dc.subjectMühendislik ve Teknoloji
dc.subjectSignal Processing
dc.subjectGeneral Engineering
dc.subjectOcean Engineering
dc.subjectEngineering (miscellaneous)
dc.subjectElectrical and Electronic Engineering
dc.subjectPhysical Sciences
dc.subjectDeniz Bilimleri ve Teknolojisi
dc.subjectOşinografi
dc.subjectMÜHENDİSLİK, ELEKTRİK VE ELEKTRONİK
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMühendislik
dc.subjectMÜHENDİSLİK, OCEAN
dc.titleANALYTICAL SYNCHRONIZATION OF TWO-END MEASUREMENTS FOR TRANSMISSION LINE PARAMETERS ESTIMATION AND FAULT LOCATION
dc.typeMakale
dc.relation.journalISTANBUL UNIVERSITY-JOURNAL OF ELECTRICAL AND ELECTRONICS ENGINEERING
dc.contributor.departmentWroclaw University of Science & Technology , ,
dc.identifier.volume13
dc.identifier.issue1
dc.identifier.startpage1569
dc.identifier.endpage1574
dc.contributor.firstauthorID3380642


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster