Basit öğe kaydını göster

dc.contributor.authorPrice, Berat Yuksel
dc.contributor.authorHardal, Gokhan
dc.date.accessioned2021-03-05T21:40:42Z
dc.date.available2021-03-05T21:40:42Z
dc.date.issued2016
dc.identifier.citationHardal G., Price B. Y. , "INFLUENCE OF NANO-SIZED COBALT OXIDE ADDITIONS ON THE STRUCTURAL AND ELECTRICAL PROPERTIES OF NICKEL-MANGANITE-BASED NTC THERMISTORS", MATERIALI IN TEHNOLOGIJE, cilt.50, ss.923-928, 2016
dc.identifier.issn1580-2949
dc.identifier.otherav_da0ae919-bc38-4a9c-98b4-277a338c3302
dc.identifier.othervv_1032021
dc.identifier.urihttp://hdl.handle.net/20.500.12627/143764
dc.identifier.urihttps://doi.org/10.17222/mit.2015.228
dc.description.abstractThe structural and electrical properties of NiMn2O4 and Ni0.5CoxMn2.5-xO4 (where x = 0.5, 0.8 and 1.1) NTC thermistors have been investigated. The samples, prepared by conventional ceramic processing techniques, were calcinated at 900 degrees C for 2 h and then sintered at 1100 degrees C and 1200 degrees C for 5 h. The cubic spinel phase was observed by XRD analysis in the NiMn2O4 and Ni0.5Co0.8Mn1.7O4 samples sintered at 1100 degrees C for 5 h. The sintering at 1200 degrees C resulted in much denser microstructures with a larger grain size. The room-temperature electrical resistivity (rho(25)) and material constant (B) value of the NiMn2O4 sample sintered at 1100 degrees C were 7710 Omega cm and 3930 K, respectively. The electrical resistivity of the samples decreased significantly with the addition of Co3O4. The B-25/85 values of the Ni0.5CoxMn2.5-xO4 (where x = 0.5, 0.8 and 1.1) samples sintered at 1100 degrees C were found to be 3820 K, 3525 K and 3270 K, respectively.
dc.language.isoeng
dc.subjectMühendislik, Bilişim ve Teknoloji (ENG)
dc.subjectMetalurji ve Malzeme Mühendisliği
dc.subjectMALZEME BİLİMİ, MULTIDISCIPLINARY
dc.subjectMalzeme Bilimi
dc.subjectMETALURJİ VE METALURJİ MÜHENDİSLİĞİ
dc.subjectMühendislik ve Teknoloji
dc.titleINFLUENCE OF NANO-SIZED COBALT OXIDE ADDITIONS ON THE STRUCTURAL AND ELECTRICAL PROPERTIES OF NICKEL-MANGANITE-BASED NTC THERMISTORS
dc.typeMakale
dc.relation.journalMATERIALI IN TEHNOLOGIJE
dc.contributor.departmentİstanbul Üniversitesi , ,
dc.identifier.volume50
dc.identifier.issue6
dc.identifier.startpage923
dc.identifier.endpage928
dc.contributor.firstauthorID227421


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster